Amran
Current Transformers
Voltage Transformers

Contact Details (* minimum required)
Company *
Contact Name *
Address
City
State
Zip Code
Telephone *
Fax
Email
Quote Details
End Product / Application
Customer P/N (if available)
Current supplier & their Cat P/N (we cross reference industry standard products)
Estimated Annual Usage
Quote On 1
Prototype Needed (when) Production Planned (when)
Electrical / Mechanical Specifications
                       YOU CAN SKIP THE FORM BELOW AND DESCRIBE YOUR OWN SPECS HERE
Minimum information needed to quote: System voltage, Ratio, Accuracy, Burden(load on secondary), and Min. ID
                                            CLICK SEND AFTER DESCRIBING YOUR SPECS

Description                                   Upload your prints / specs / file

                                                                 
             
                                                      
                                                                                    OR
                                              SELECT WHAT YOU CAN BELOW
                                 (We will use our own standard options for the parameters not selected by you)
Type:
Special CT(example: Split core, Auxillary, 3 phase etc.) - Describe:
Application:
Special - Describe:
                      
Application Standard:
Other - Describe:
                   
Insulation Class:
                        
Example: 105 C(Class A), 120 C(Class E), 130 C(Class B), 155 C(Class F), 180 C(Class H)
System Voltage BIL (full wave)
  V   kV
Example: 600V, 5000V, 15000V, 25000V Example: 10kV, 45kV, 100kV, 150kV etc.
Primary Current Secondary Current OR Secondary Voltage
  A   A OR   V
OR
CT Ratio:
Accuracy: Example: 0.5&, 1%, 3% etc.
ANSI Metering 0.3, 0.6,1.2, 2.4- ANSI Relaying C100, C200, C400 IEC Class 0.5, 1, 3 etc.
Describe:
And / Or

Linearity:

 Example:1% from 20 Amp to 100 Amp OR 1%@20%, 50% and 100% primary current
levels 0.5% from 100 to 200 Amp OR 0.5%@80% and 120% primary current etc.
Describe:
Burden: Example: 5VA, 10VA, 50VA, 100VA OR 20 Ohm, 50 Ohm, 100 Ohm etc.
               ANSI B0.1, B0.2, B0.9, B1.8 etc.
  OR    VA OR    Ohm
If resistor - OR 
Outer Insulation / Construction:
        
                            (polyester / cotton etc.)      (epoxy / polyurethane)
Or Other - Describe:
       
Secondary:
Lead wire OR Studs/Terminals OR Pins
Example: 20AWG, UL10115, 12" long Example: 8/32 OR 10/32 with One flat washer, one lock washer Example: brass 1 mm with tin plating
OR Other - Describe:
Dimensions: (specify Units - inch, mm etc.)
Min ID Max OD Min Thk
Example: Round:2" ID, 4" OD, 1" Thk   Rectangle: 4"x2" ID, 8"x6" OD, 3" Thk
Any Other - Describe:
Mounting Bracket:    
Describe:
Any other Details / Concern / Special Conditions:
Describe:
Upload your prints / Specs / Drawings: